Driver Cages

Driver Security and Access Cages Secure waiting stations for shipping receiving dock areas. Helps contain drivers and other facility visitors until properly admitted.

Driver & Building Access Security Cages for Containing Facility Visitors

application that is placed around an entrance in a warehouse. This

is used to keep truck drivers, and delivery personnel secluded in

one place when entering the warehouse or making a delivery. Each

driver cage includes a key lock on the driver side, a push bar on

the warehouse side, and a 2 x 1 8 slide up service window with

shelf. This Driver Cage prevents people from wandering throughout

the warehouse, getting lost or hurt in the warehouse, as well as

additional security. Cages consists of rectangular 2 x 1 mesh, 10

gauge woven wire, with a wet enamel gray finish. Doors are 3 W x 7 H

with a 1 H transom panel at the top.

Driver and building access wire partition cages provide a secure way to seclude visitors to warehouses until they can be admitted and protect employees, inventory.

• Sage Products in Cary, IL began to notice a problem with shipping and delivery drivers entering their building without supervision, having full access to their.
• WireCrafters Driver Access Cages are a simple, cost effective way of controlling access to distribution centers or factory floors and confining truck drivers and.

Driver access cages secure your warehouse while monitoring and controlling guest access protecting visitors from forklift traffic and dangerous machinery.

Prevent visiting personnel from unknowingly walking into active fork truck traffic areas or automated machinery work cells.

Driver Access Cages can be ordered in any size, and may be built free standing or anchored to existing building walls. View stock panel sizes

Typically these driver cages are furnished with a service window with a shelf to provide the driver a counter to sign and pick up their paperwork.

WireCrafters Driver Access Cages are a simple, cost effective way of controlling access to distribution centers, buildings, or factory floors. Building access is controlled by surrounding building entry doors with our wire mesh partitions, confining truck drivers and other visitors to a defined area. Driver Access Cages can be ordered in any size, and may be built free standing or anchored to existing building walls.

Keep Your Facility Safe Secure

Driver access cages protect your company as well as visitors, vendors, and other warehouse or building personnel. Truck drivers, delivery people and other non-employees who enter your facility can be an insurance risk. Unauthorized personnel visiting your facility may unknowingly walk into active fork truck traffic areas, or into automated machinery work cells.

Whether a building visitor is looking for someone to sign a ticket or just looking for a restroom, they should not be wandering around your factory floor. Failing to restrict building access is a huge potential risk for accidents in your facility, especially if they are not a trained employee. Driver Access Cages also protect your inventory. In order to keep the honest man honest, separating outside personnel from your inventory and expensive equipment is essential.

Typical Building Access Cage Configuration

Driver Access Cages, or Man Traps, are typically constructed as three sided cages that adjoin to an outside wall with an entry door. These driver access cages are made of our Style 840 Wire Partition System. Heavy 10 gauge wire woven into a 2 x 1 rectangular mesh is strong enough for any industrial security cage requirement. The size of these building access cages vary from six by six up to eight by eight. Because WireCrafters has panels in one foot increments, any size cage can be configured.

Failing to restrict building access is a huge potential risk for accidents in your facility.

Typically these driver cages are furnished with a service window with a shelf to provide the driver a counter to sign and pick up their paperwork. The access cage also has a pedestrian hinge door for access. The door can be equipped with a full width push bar on the factory floor side to allow employees to exit the factory floor at any given time, or during an emergency. On the inside of the driver access cage, the door is equipped with a simple key lock. Building visitors do not have a key, so this standard key lock keeps drivers confined to the secure enclosed area.

Accessories for Driver Access Cages

WireCrafters can provide a steel bench 4, 6, or 8 wide to allow for seating within the cage for waiting drivers. For additional security, a ceiling panel made of the same heavy 10 gauge wire can be added to the access cage. Because Driver Access Cages are usually located in high traffic shipping dock areas, our single or double high GuardRail Safety Railing System can be installed around the perimeter of the access cage for added protection.

Full width push bar for exit from warehouse side.

Service window with shelf for paperwork pass through.

Coded push button entry lock available.

Remote controlled electric latch release available.

Wall and ceiling panels constructed of 10 gauge wire, 2 x 1 rectangular opening.

Posts have welded on base plate for lagging to the floor.

Posts are set no more than ten feet apart.

Walls have minimum 1 1/2 horizontal reinforcement at least every 60 inches.

Ten widths, 1 to 10 in one-foot increments. Standard panel height is 4 -0. Full height partition walls are built by stacking two panels between posts. Mesh: 10-gauge wire woven into 2 x 1 rectangular openings. Frame 1 1/4 x 1 1/4 x 1/8 steel angle. Custom sized panels are available. Alternate meshes are also available.

Shall be 10 gauge steel wire crimped and woven in to 2 x 1 opening rectangular mesh, securely welded into a frame of 1 1/4 x 1 1/4 x 1/8 steel angle factory punched with 7/8 x 7/16 slotted holes to accept 3/8 mounting hardware. Panels four to six feet wide shall have one 1/4 x 3/4 flat stiffener, wider panels receive two 1/4 x 3/4 stiffeners. All panels shall be fastened to posts with 3/8 x 3 plated bolts and nuts.

Shall be constructed of the same materials as the panels with two 1/4 x 3/4 horizontal stiffeners across the width, and two diagonal 1/4 x 3/4 stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs cylinder lock optional, three 4 x 4 spun pin hinges, and pick plate/slam bar assembly.

Shall be constructed of the same materials as the panels with two 1/4 x 3/4 horizontal stiffeners across the width, and two vertical 1/4 x 3/4 stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1 7/8 x 2 3/8 door track, pad lock lugs cylinder lock optional, and door keeper assembly.

Shall be made of 2 x 2 x 14 gauge steel tubing. Base plates of 2 x 7 x 1/4 steel flat with two 7/16 round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2 holes to accept hardware for mounting panels.

Shall be 3/8 standard thread grade two plated nuts and bolts. Floor anchors are 3/8 wedge type-provided.

Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment. View other available finish options, including powder coat custom colors.

Driver Cages. Driver Cages are an application that is placed around an entrance in a warehouse. This is used to keep truck drivers, and delivery personnel.